Nikon d40 manual download -

Looking for:

Nikon | Download center | D40 - Download Nikon D40 Owner's Manual 

Click here to DOWNLOAD

     

- Nikon d40 manual download

 

To take photographs in programmed auto: Rotate the mode dial to P. Page Mode A Aperture-Priority Auto Mode A Aperture-Priority Auto In aperture-priority auto, you choose the aperture from values between the minimum and maximum for the lens while the camera automatically selects the shutter speed that will produce the optimal exposure. Aperture can be set to values between the minimum and max- imum values for the lens.

To prevent blurring caused by camera shake, use a tripod or an optional remote control Shutter speed Description bulb Shutter remains open while the shutter-release button is held down. Page Exposure Exposure Metering Controls used The metering method determines how the camera sets exposure. The following options are available when the mode dial is rotated to P, S, A, or M matrix metering is used in other modes : Method Description Recommended in most situations.

Camera meters a wide area of the frame Matrix and instantly sets exposure according to distribution of brightness, color, dis- tance, and composition for natural results.

Page Autoexposure Lock Autoexposure Lock If the subject is not in the metered area when center-weighted or spot metering is used, exposure will be based on lighting conditions in the background and the main subject may not be correctly exposed.

This can be prevented by using autoexposure lock. Select mode P, S, or A and choose center-weighted or spot metering exposure lock has no effect in mode M. It is available only in P, S, A, and M modes and is most effective when used with center-weighted or spot metering Flash output can be increased to make the main subject appear brighter, or reduced to prevent unwanted highlights or reflections. Page White Balance Use under incandescent lighting.

Use under fluorescent lighting. Use with subjects lit by direct sunlight. Use with built-in flash or optional Nikon flash units. Use in daylight under overcast skies. Use in daylight with subjects in the shade. Use gray or white object or existing photograph as reference for white balance The following operations can be performed in full-frame playback: View additional photographs View photo Page Photo Information Photo Information Photo information is superimposed on images displayed in full-frame playback.

File Information Protect status Protect status The following operations can be performed: Zoom in and out View other areas of image View other images Cancel zoom Delete photo Protect photo Exit to shooting Shutter button Page Protecting Photographs From Deletion Protecting Photographs from Deletion In full-frame, zoom, and thumbnail playback, the button can be used to protect photo- graphs from accidental deletion. The supplied PictureProject software can then be used to copy photographs to the computer, where they can be organized, retouched, and printed.

During Transfer Do not turn the camera off or disconnect the USB cable while transfer is in progress. Page 70 Connecting the Printer Before printing, check that the camera battery is fully charged.

The menu shown at right will be displayed. Press the multi selector up or down to highlight an option and press to the right to select. Page 72 Printing Multiple Pictures To print multiple pictures or create an index print listing all JPEG photographs as small thumbnail images, press the the PictBridge playback display.

Page 76 To modify menu settings: Display menus. Select menu. Position cursor in selected menu. Display options. Make selection. Press the shutter-release button halfway to exit the menus and return to shooting mode.

The monitor will turn off. Option Description Delete Page Playback Folder Playback Folder Choose a folder for playback: Option Description Only photos in the folder currently selected for Folders in the setup menu are displayed during playback.

This option is Current selected automatically when a photo is taken. If a memory card default is inserted and this option selected before photos have been taken, a message stating that the folder contains no images will The following options are available: Option Description Choose how long each picture will be displayed. Frame intvl Start slide show. Option Description Optimize images according to scene. After adjusting set- tings, highlight Done and press OK.

Choose high settings for sharp outlines, low set- tings for softer outlines. Page 83 Measuring a Value for Preset White Balance Place a neutral gray or white object under the lighting that will be used in the final photograph. A standard gray card can be used as a reference in studio settings.

Do alter exposure from the value selected by the camera; when shooting in mode M, use the electronic analog exposure display to select optimum exposure.

Note that if a new value is measured for white balance, white balance will be set to the mea- sured value even if Use photo is currently selected in the preset white balance menu. Page Custom Settings Custom Settings Custom Settings are used to customize camera settings to suit individual preferences. TTL default : Flash output is adjusted automatically in response to shooting conditions. Manual: The flash fires at the level selected in the menu shown at right.

Page Self-Timer Self-Timer Choose the length of the shutter-release delay in self-timer mode The default setting is 10s. Page Format Memory Card Press the multi selector up or down to highlight items and then press to the right to select or deselect.

Selected items are indicated by a check mark. Highlight Done and press OK to return to the list of menu names shown in Step 1. Page 94 Classic format is shown below.

Select On to automatically display shooting information after the shutter-release button is released. If Custom Setting 7 Image review is off, shooting information will also be displayed after a photograph is taken. Comments can be viewed in Capture NX available separately; Page Folders e. The camera treats folders with the same name but different folder numbers as the same folder. Page File No. Sequence File No. Sequence Choose how the camera names files. Highlight On and press OK.

The message shown at right will be displayed. With the lens ten centimeters four inches from a well-lit, featureless white object, frame the object so that it fills the viewfinder and then press the shutter-release but- ton halfway.

Page Auto Image Rotation Auto Image Rotation Photographs taken while On the default option is selected con- tain information on camera orientation, allowing them to be rotated automatically during playback 50 or when viewed in Capture NX available separately; or PictureProject. Page D-Lighting To create retouched copies from the retouch menu: Highlight menu item. Highlight photo. To view selected picture full frame, press and hold button. Confirm the effects of red- eye correction and create a corrected copy as described in the following table.

Note that red-eye correction may not always produce the expected results and may in very rare cir- cumstances be applied to portions of the image that are not affected by red eye; Selecting Sepia or Cyanotype displays a preview of the selected image; press the multi selector up to increase color saturation, down to decrease.

Press OK to create a monochrome copy and return to full-frame playback. Page Selecting Small picture from the retouch menu displays the menu shown in Step 1. Fol- low the steps below to create small copies of multiple pictures. Highlight Choose size. Highlight desired picture size. Highlight Select images. Select pictures Selected pictures are marked with Highlight Yes. Page Image Overlay Image Overlay Image overlay combines two existing RAW photographs to create a single picture that is saved separately from the originals.

The new picture is saved at current image quality and size settings; before creating an overlay, set image quality and size available. Page 50 with the new picture displayed in the monitor. Other images are not displayed on the selection screen. The overlay has the same photo info including date of recording, metering, shutter speed, aperture, exposure mode, exposure compensation, focal length, and image orientation and values for white balance and optimize image as the photograph selected for Image 1.

Page Technical Notes Software Use Only Nikon Brand Electronic Accessories Only Nikon brand accessories certified by Nikon specifically for use with your Nikon digital camera are engineered and proven to operate within its operational and safety requirements.

Page Lenses 7. Type G and D Page Nikkor lenses. Negative voltages or voltages over V applied to the accessory shoe could not only prevent normal operation, but damage the sync circuitry of the camera or flash. Before using a Nikon Speedlight not listed in this section, contact a Nikon-authorized service representative for more information. Page Refer to the Speedlight manual for detailed instructions. Use Nikon filters; other filters may interfere with autofocus or electronic range finding.

Use the C-PL circular polarizing fil- ter instead. Up to date infor- mation is available at Nikon websites or from our latest product catalogs. Nikon recommends that the camera be inspected by the original retailer or Nikon service representative once every one to two years, and that it be serviced once every three to five years note that fees apply to these services. Page Note, however, that the filter is extremely delicate and easily damaged. Nikon recommends that the filter be cleaned only by Nikon-authorized service personnel.

To prevent the camera from powering off while the mirror is raised, use a full-charged battery or an optional EH-5 AC adapter and EP-5 AC adapter connector Remove the lens and turn the camera on.

Keep dry: This product is not waterproof, and may malfunc- tion if immersed in water or exposed to high levels of humidity. Page Nikon takes every possible precaution to prevent foreign matter from coming into contact with the low-pass filter during production and shipping. The D40, however, is designed to be used with inter- changeable lenses, and foreign matter may enter the camera when lenses are removed or exchanged.

Page Troubleshooting Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon representative.

Refer to the page numbers in the right-most column for more information. Problem Camera takes time to turn on. Page Problem Image in viewfinder is not in focus. AF-assist illuminator does not light.

Shutter release is disabled. No photo taken when remote con- trol shutter-release button pressed. Only one shot taken each time shut- ter-release button is pressed in con- tinuous shooting mode. Page Problem Flashing areas appear in images Shooting data appear on images A graph appears during playback RAW image is not played back. Contact retailer or Nikon- authorized service representative. Format memory card. Page Insert new ink or toner cartridge in printer.

If error — occurs with ink remaining in printer, check printer status. Press shutter-release button again. If error persists, consult with Nikon-authorized service representa- blinks tive. Contact Nikon-authorized service representative. Page The Command Dial The command dial can be used in alone or in combination with other controls to adjust the following settings. Changes to the affected setting are visible in the viewfinder and shoot- ing information display.

Exposure Choose a combination of aperture and shutter speed flexible program, mode P; Page White Balance and Color Temperature Approximate color temperatures for each white balance setting are given below values may differ from color temperatures given by photo color meters : White balance 3,K—8,K Auto Incandescent Fluorescent Dir.

Detection range —1. System 2. However, we realize that providing ease and simplicity to access an article will be so much helpful. With this table of content, you can go to the certain part of this writing simply by clicking on the sub topic below. By the record, a manual is something that is really important as a complement for an electronic product, especially digital camera.

From this manual, there will be a lot of information obtained. Something like specification, instruction, camera parts, settings, features, and other related information will be something possible to obtain.

This is why we aim to bring the Nikon D40 Manual here. With this manual, we hope that we can help users as well as enthusiasts to understand more about this Nikon camera product.

Before getting deeper to the Nikon D40 Manual and its specification, firstly, we will talk about the overall look of this camera first. By this reason, Nikon also pays more attention on this thing. Not only upgrading the specification, but they also upgraded the look of it. Are you curious about it? Here is the review of Nikon D40 camera Look. Nikon D40 is slightly designed as its sibling D40X, but it comes in weightier body.

However, this camera is still friendly to carry for your street camera. This camera has robust and well-body construction that is very fine to accompany your photographic moments. It has the typical Nikon body with tough black look with ergonomic style. It will be very nice to be in your hand with real mounted hand grip on the front part.

And it will allow you to do one-handed shooting. Based on the Nikon D40 manual, this camera is made weightier than D40X which is around g including the batteries and cards. And it has a dimension of 5. With a help of the camera strap, it will be fine if you get tired of handling it. Nikon is always trying to be a leader in camera manufacture.

And now, we will find good DSLR camera that is much wanted for all level-users with very competitive price. You will find it so affordable for your low budgeting purchase.